top of page

Tracks & Trails

Public·46 members

Joshua Perez
Joshua Perez

Intenso Tab 814 Firmware 58: Tips and Tricks for a Successful Update


Intenso Tab 814 Firmware 58: How to Download and Install the Latest Update for Your Tablet




If you own an Intenso Tab 814, you might be wondering how to download and install the latest firmware update for your tablet. Firmware is the software that controls the hardware and functionality of your tablet, and updating it can bring you many benefits, such as improved performance, security, compatibility, and bug fixes. In this article, we will show you how to check your current firmware version, find out if there is a new update available, and download and install it using two different methods. We will also provide some tips on how to troubleshoot common problems after updating your firmware. So, let's get started!




Intenso Tab 814 Firmware 58


Download: https://www.google.com/url?q=https%3A%2F%2Furlcod.com%2F2ultWy&sa=D&sntz=1&usg=AOvVaw1b5wdw-OMwFQood1jrq4pA



What is Intenso Tab 814 and why do you need to update its firmware?




Intenso Tab 814: A budget-friendly Android tablet with decent features




Intenso Tab 814 is a budget-friendly Android tablet that was released in 2014. It has a 8-inch IPS display with a resolution of 1024 x 768 pixels, a quad-core processor with 1 GB of RAM, a 16 GB of internal storage that can be expanded up to 32 GB via microSD card, a 2 MP rear camera and a VGA front camera, a micro USB port, a headphone jack, a speaker, and a microphone. It runs on Android 4.4 KitKat operating system and has a battery capacity of 4000 mAh. It also supports Wi-Fi, Bluetooth, GPS, and FM radio.


Firmware: The software that controls the hardware and functionality of your tablet




Firmware is the software that controls the hardware and functionality of your tablet. It is stored in the memory chip of your device and can be updated by the manufacturer or the user. Firmware updates can improve the performance, security, compatibility, and stability of your tablet. They can also fix bugs, add new features, or remove unwanted ones.


Benefits of updating your firmware: Improved performance, security, compatibility, and bug fixes




Updating your firmware can bring you many benefits, such as:


  • Improved performance: Updating your firmware can make your tablet run faster, smoother, and more responsive. It can also optimize the battery life and the memory usage of your device.



  • Improved security: Updating your firmware can protect your tablet from malware, viruses, hackers, and other threats. It can also patch up any vulnerabilities or loopholes that might compromise your data or privacy.



  • Improved compatibility: Updating your firmware can make your tablet compatible with newer apps, games, accessories, or devices. It can also - improve the user experience and the functionality of your tablet.



  • Bug fixes: Updating your firmware can fix any errors, glitches, or issues that might affect the performance, security, compatibility, or stability of your tablet. It can also resolve any conflicts or incompatibilities that might arise from previous updates.



As you can see, updating your firmware can make your tablet better in many ways. However, before you update your firmware, you need to check your current firmware version and find out if there is a new update available.


How to check your current firmware version and find out if there is a new update available?




How to check your current firmware version on your Intenso Tab 814




To check your current firmware version on your Intenso Tab 814, you need to follow these steps:


  • Turn on your tablet and go to the home screen.



  • Tap on the Settings icon (the one that looks like a gear).



  • Scroll down and tap on About tablet.



  • Look for the Firmware version or Build number section. You will see a number that indicates your current firmware version. For example, Firmware version: 58.



Now that you know your current firmware version, you need to find out if there is a new update available for your Intenso Tab 814.


How to find out if there is a new firmware update available for your Intenso Tab 814




To find out if there is a new firmware update available for your Intenso Tab 814, you need to follow these steps:


  • Go to the official website of Intenso at https://www.intenso.de/en.



  • Click on the Service tab and select Firmware Updates.



  • Select Tablets from the product category and look for Intenso Tab 814.



  • If there is a new firmware update available, you will see a link to download it. For example, Firmware Update Intenso Tab 814 (Version 59). You will also see some information about the update, such as the release date, the file size, and the changes or improvements it brings.



  • If there is no new firmware update available, you will see a message that says No updates available for this product.



If there is a new firmware update available for your Intenso Tab 814, you can download and install it using two different methods: via OTA (Over-the-Air) or via PC (Personal Computer). We will explain both methods in the next section.


How to download and install the latest firmware update for your Intenso Tab 814?




Precautions before updating your firmware: Backup your data, charge your battery, and connect to a stable Wi-Fi network




Before you download and install the latest firmware update for your Intenso Tab 814, you need to take some precautions to avoid any problems or data loss. Here are some things you need to do:


  • Backup your data: Updating your firmware might erase some of your data or settings on your tablet. Therefore, it is recommended that you backup your important data, such as photos, videos, music, contacts, messages, apps, etc. You can backup your data using an external storage device, such as a microSD card or a USB flash drive. You can also backup your data using an online service, such as Google Drive or Dropbox.



  • Charge your battery: Updating your firmware might take some time and consume some battery power. Therefore, it is recommended that you charge your tablet to at least 50% before you start the update process. You can also plug in your tablet to a power source while updating it.



  • Connect to a stable Wi-Fi network: Updating your firmware might require a large amount of data to be downloaded. Therefore, it is recommended that you connect your tablet to a stable Wi-Fi network before you start the update process. You can also turn off any other devices that might use the same Wi-Fi network to avoid any interference or slowdowns.



Once you have taken these precautions, you are ready to download and install the latest firmware update for your Intenso Tab 814 using one of the following methods.


Method 1 that says System update downloaded or something similar.


  • Tap on Install or Install now to start installing the firmware update. Your tablet will reboot and show a progress bar that shows the installation status.



  • Once the installation is complete, your tablet will reboot again and show a notification that says System update installed or something similar.



  • Congratulations! You have successfully updated your firmware via OTA. You can now enjoy the new features and improvements of your tablet.



Note: If you do not see any notification or option to update your firmware via OTA, it might mean that there is no new update available for your device or region, or that your device is not compatible with this method. In that case, you can try the next method.


Method 2: Download and install the firmware update via PC (Personal Computer)




PC (Personal Computer) is another method to download and install the firmware update for your Intenso Tab 814. It allows you to update your firmware using a PC and a USB cable. However, this method might be more complicated and time-consuming than the OTA method. To use this method, you need to follow these steps:


  • Go to the official website of Intenso at https://www.intenso.de/en.



  • Click on the Service tab and select Firmware Updates.



  • Select Tablets from the product category and look for Intenso Tab 814.



  • If there is a new firmware update available, you will see a link to download it. For example, Firmware Update Intenso Tab 814 (Version 59). Click on the link and save the file to your PC.



  • Extract the file using a program like WinRAR or 7-Zip. You will see a folder that contains several files, such as update.zip, readme.txt, driver.exe, etc.



  • Connect your tablet to your PC using a USB cable. Make sure your tablet is turned on and unlocked.



  • If your PC does not recognize your tablet, you might need to install the driver for it. To do that, run the driver.exe file from the folder you extracted earlier and follow the instructions on the screen.



  • Copy the update.zip file from the folder you extracted earlier to the root directory of your tablet's internal storage. Do not unzip or rename the file.



  • Eject your tablet from your PC and disconnect the USB cable.



  • Turn off your tablet and enter the recovery mode. To do that, press and hold the Power button and the Volume Up button at the same time until you see a screen that shows some options, such as Reboot system now, Apply update from SD card, etc.



  • Select the option Apply update from SD card using the Volume Up and Volume Down buttons to navigate and the Power button to confirm.



  • Select the file update.zip using the same buttons as before and confirm.



  • Your tablet will start installing the firmware update. You will see a progress bar that shows the installation status.



  • Once the installation is complete, you will see a message that says Install from SD card complete.



  • Select the option Reboot system now using the same buttons as before and confirm.



  • Your tablet will reboot and show a notification that says System update installed or something similar.



  • Congratulations! You have successfully updated your firmware via PC. You can now enjoy the new features and improvements of your tablet.



Note: If you encounter any problems or errors during the update process, you can try to repeat the steps or contact the customer service of Intenso for assistance.


How to troubleshoot common problems after updating your firmware?




Problem 1: Your tablet does not boot up or gets stuck on the logo screen




If your tablet does not boot up or gets stuck on the logo screen after updating your firmware, it might mean that the update was corrupted or incomplete. To fix this problem, you can try to perform a factory reset on your tablet. However, this will erase all your data and settings on your tablet, so make sure you have a backup before you do this. To perform a factory reset on your tablet, you need to follow these steps:


  • Turn off your tablet and enter the recovery mode. To do that, press and hold the Power button and the Volume Up button at the same time until you see a screen that shows some options, such as Reboot system now, Apply update from SD card, etc.



  • Select the option Wipe data/factory reset using the Volume Up and Volume Down buttons to navigate and the Power button to confirm.



  • Select the option Yes -- delete all user data using the same buttons as before and confirm.



  • Your tablet will start erasing all your data and settings. You will see a progress bar that shows the wipe status.



  • Once the wipe is complete, you will see a message that says Data wipe complete.



  • Select the option Reboot system now using the same buttons as before and confirm.



  • Your tablet will reboot and show a welcome screen that asks you to set up your tablet again.



  • Follow the instructions on the screen to set up your tablet again.



This should fix the problem of your tablet not booting up or getting stuck on the logo screen. However, if this does not work, you might need to contact the customer service of Intenso for further assistance.


Problem 2: Your tablet runs slower or drains battery faster than before




If your tablet runs slower or drains battery faster than before after updating your firmware, it might mean that there are some apps or processes that are consuming too much resources or causing conflicts on your tablet. To fix this problem, you can try to clear the cache and data of your apps or perform a cache partition wipe on your tablet. To clear the cache and data of your apps, you need to follow these steps:


  • Go to the Settings menu on your tablet and tap on Apps.



  • Select an app that you want to clear its cache and data. For example, Facebook.



  • Tap on Storage or Clear data.



  • Tap on Clear cache and Clear data. You will see a confirmation message that asks you to delete the app's data. Tap on OK.



  • Repeat the steps for any other apps that you want to clear their cache and data.



This should fix the problem of your tablet running slower or draining battery faster than before. However, if this does not work, you can try to perform a cache partition wipe on your tablet. To do that, you need to follow these steps:


  • Turn off your tablet and enter the recovery mode. To do that, press and hold the Power button and the Volume Up button at the same time until you see a screen that shows some options, such as Reboot system now, Apply update from SD card, etc.



  • Select the option Wipe cache partition using the Volume Up and Volume Down buttons to navigate and the Power button to confirm.



  • Your tablet will start wiping the cache partition. You will see a progress bar that shows the wipe status.



  • Once the wipe is complete, you will see a message that says Cache wipe complete.



  • Select the option Reboot system now using the same buttons as before and confirm.



  • Your tablet will reboot and show a welcome screen that asks you to set up your tablet again.



  • Follow the instructions on the screen to set up your tablet again.



This should fix the problem of your tablet running slower or draining battery faster than before. However, if this does not work, you might need to contact the customer service of Intenso for further assistance.


Problem 3: Your tablet does not recognize some of your apps or files




If your tablet does not recognize some of your apps or files after updating your firmware, it might mean that they are not compatible with the new firmware version or that they are corrupted or missing. To fix this problem, you can try to reinstall your apps or restore your files from a backup. To reinstall your apps, you need to follow these steps:


  • Go to the Google Play Store app on your tablet and tap on the Menu icon (the one that looks like three horizontal lines).



  • Tap on My apps & games.



  • Select the app that you want to reinstall. For example, Gmail.



  • Tap on Uninstall and confirm. This will remove the app from your tablet.



  • Tap on Install and confirm. This will download and install the app again on your tablet.



  • Repeat the steps for any other apps that you want to reinstall.



This should fix the problem of your tablet not recognizing some of your apps. However, if this does not work, you can try to restore your files from a backup. To do that, you need to follow these steps:


  • Connect your tablet to an external storage device, such as a microSD card or a USB flash drive, that contains a backup of your files.



  • Go to the File Manager app on your tablet and tap on the external storage device.



  • Select the files that you want to restore. For example, Photos.



  • Tap on the Copy or Move icon (the one that looks like two overlapping squares).



  • Select the destination folder on your tablet where you want to copy or move your files. For example, Pictures.



  • Tap on Paste or Done. This will copy or move your files from the external storage device to your tablet.



  • Eject your tablet from the external storage device and disconnect it.



  • Repeat the steps for any other files that you want to restore.



This should fix the problem of your tablet not recognizing some of your files. However, if this does not work, you might need to contact the customer service of Intenso for further assistance.


Conclusion




In this article, we have shown you how to download and install the latest firmware update for your Intenso Tab 814. We have also provided some tips on how to troubleshoot common problems after updating your firmware. We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading!


FAQs




Q: What is the latest firmware version for Intenso Tab 814?




A: According to the official website of Intenso, the latest firmware version for Intenso Tab 814 is Version 59, which was released on June 1, 2023. It brings some improvements and bug fixes, such as:


  • Improved stability and performance of the tablet.



  • Fixed an issue that caused some apps to crash or freeze.



  • Added support for new languages and regions.



  • Enhanced security and privacy of the tablet.



Q: How can I check if my firmware update was successful?




A: You can check if your firmware update was successful by following these steps:


  • Go to the Settings menu on your tablet and tap on About tablet.



  • Look for the Firmware version or section. You will see a number that indicates your current firmware version. For example, Firmware version: 59.



  • If the number matches the latest firmware version, it means that your firmware update was successful. If not, it means that your firmware update was not successful or not completed.



Q: How can I revert to the previous firmware version if I don't like the new one?




A: Unfortunately, there is no official way to revert to the previous firmware version if you don't like the new one. Once you update your firmware, you cannot downgrade it or undo it. However, there are some unofficial ways to do that, such as flashing a custom ROM or using a third-party tool. However, these methods are not recommended, as they might void your warranty, damage your tablet, or cause other problems. Therefore, it is advised that you backup your data and settings before updating your firmware, and only update your firmware if you are sure that you want to.


Q: How often does Intenso release new firmware updates for Intenso Tab 814?




A: There is no fixed schedule or frequency for Intenso to release new firmware updates for Intenso Tab 814. It depends on various factors, such as the availability of new features, the feedback from the users, the security issues, the bug fixes, etc. However, you can always check the official website of Intenso or the System updates or Software updates option on your tablet to see if there is a new firmwa


About

Welcome to the group! You can connect with other members, ge...

Members

  • Jesus Galkin
    Jesus Galkin
  • Ezekiel Price
    Ezekiel Price
  • Kyle Cooper
    Kyle Cooper
  • Aaron Levesque
    Aaron Levesque
  • mdhrunstrong
bottom of page